CUBE and TOWER - absorber for cables

NEW: CUBE and TOWER Absorber for ables  

Next to decoupling of HiFi components and load speakers we are experimenting since long time with damping of cables. So decoupling has been proved as particularly effective in area of load speaker and power cables. The reason for this improvement is obviously. According on electronic components cables does have the problem with microphonic too.

For example. If you knock on the cable of a headphone you could hear a noticeable “tok”.
What happens? The mechanical energy of the knocking will be transformed in electrical energy.
Therefore you can hear the knocking in your headphone. This negative effect is pure microphonic.

The same effect occurs with cables to load speakers and power cables. The vibrations in the air from the load speakers as well as the vibrations from the floor, produce microphonic within the cables. Because cables are often very long the effect is significant hearable in the form of “unrest”. So with our CUBE or TOWER absorber you will have more rest and darker background.

A customer reports: I received the shipment today, with thanks. My first impressions:
Depth has increased layering, more information, bass has more depth, tone and texture, liquid, not edgy anymore.
Its a wonderful product - has simply elevated my listening joy. Thanks and keep changing the world ...

The essential precondition of good cable is a homogeneous electromagnetic field over the whole length of the cable. For the absorber corpus we have chosen wood or POM , because it has no electronic effect and additional it damps vibrations because of his airy and amorphous structure.

NEW  TOWER Our TOWER absorber for cables has an corpus of the POM, which has very good damping behaviour. On the buttom side is embedded a very soft foam of rubber, adjusted to the low weight of cables. Depending on the hardness of the cable we recommend one absorber per 30 to 40cm cable length. The cable mst not touch the floor.
CUBE For the absorber corpus we have chosen wood, because it has no electronic effect and additional it damps vibrations because of his airy and amorphous structure. The selected wood called “Amasaque” comes from maritime regions in Africa. It has a high ratio of air and a relative uniform structure. The surface of the wood we tread only with natural oil. Depending on the hardness of the cable we recommend one absorber per 30 to 40cm cable length. The cable mst not touch the floor.

CUBE - Details The essential improvement comes from the absorbers feet, which are senked 5mm into the floor of the CUBE. The feet consist of the proven two-layer combination of Sorbothane and airy rubber foam The bearing of the cable is a triangular cutout. So each diameter of cables has the same stable storage. Additionally in this triangular cutout a granulate of cork-rubber in a special form are mounted. The aim of this form is to achieve an adjustment to the weight of the cables. The weight of the cables does even increase disproportional to his diameter. Adjustment to the weight is one of the contents of our MLA technique (Multi Layer Adjustment). Convince yourself of the hearable improvement in the form of more rest and darker background.