STAGE - Absorber feet

NEW:Absorber feet STAGE MK2   NEW: Now available in 2 height

Our STAGE absorber new  MK2 Version are an complex redevelopment with the target to combine
coupling effectively with our approved decoupling technology.

For absorption of vibrations we use our proven MLA Technology 
with 4 different materials effective combined on 6 layers. 

With coupling two units will be joined.
Vibration will be transported controlled between both units.

Decoupling means separation and thus elimination of vibrations,
also called absorption

Therefore our STAGE absorber feet consists of two units.

STAGE-1-2 1600

 A customer reports:
... Got yesterday a new Stage. I must say I could not imagine that there is still such a margin of improvement. Of course the Master is working perfectly but this of course for HI_FI Stade is  another level. I've always been sure that the contact with the components should be minimal I certainly do not understand how it all works. But I'm grateful to you that in my age  you gave me the opportunity to believe again in a miracle. I had enough experience with different legs. I must say that basically this rough shit for money Stage of course this is rialy  stage  with an airy sound and that the most important is a terrific balance.
In general, thanks for your work and all best. Later, I will make an order for the more kits ..

The Conductor
The hemispherical Conductor has the function to gather vibrations
from the HiFi components and to transfer these in controlled way.
According to the laws of vibrations for an effective junction both units
should have the same material. Because most bases of devices consist
of aluminum, our Conductor consists of aluminum too.

The Conductor collects the vibration over an small cylindrical elevation
at the top side.

STAGE-Conductor 1600px

The Absorber Corpus

The cylindrical absorber corpus based on our approved MASTER series.
An additional circular layer made of aluminum ensures best lateral stabilization
and serves as entry point for the conductor.


STAGE-Corpus 1600

The Effectiveness

The vibrations within HiFi component will be drained of from the conductor and  directed transported into the absorber corpus.
Such constructions are not new. But most of them are formed like spikes, with the disadvantage of vertical movements.
Because the conductor is joined orbital with the absorber corpus, vertical movements are excluded and this with minimal contact surface.

Because of the two-layer construction unevenness on the floor of the HiFi components will be balanced.
So the absorber corpus will be mechanical loaded equally and can work on an optimal level.

The Placement:

We advise placement directly under the floor of the component.
Removing of the original feet is not necessary.

We recommend the usage of 3 STAGE absorbers per component.
See figure on the right.
Attention: Place the single absorber on the lighter side of the component.

3Punkt-Auftsellung en

The construction with 6 layer of 4 different absorber materials eleminates effectively a wide range of disturbance frequencies


The complex layer model  
of the absorber corpus

The layers from top to - down

- Ring of aluminum
- Natural rubber
- Sorbothane
- Cork rubber granulate 1mm
- massive Aluminum corpus 
- Cork rubber granulate 2mm


STAGE-MK2 Skizze en

 STAGE-unten hoch 1600px
 Corpus bottom side

NEW: Available in 2 height
For optimal adjustment to the weight of the HiFi component we have developed the following 2 variants.

         STAGE-1   up to   8 kg  per piece     Height 35 or 28 mm
         STAGE-2   up to 20 kg  per piece     Height 48 or 33 mm

Read more about our favored absorber material Sorbothane.

Details about our MLA Technology you could read here.

STAGE-1 - bis 8 kg / Stück

Hochwirksame Multi-Layer Absorber
Absorberfuß belastbar bis  8 kg pro Stück

  • Durchmesser 44 mm
  • Höhe: 28mm oder 35 mm
  • Lieferumfang: 1 Absorberfuß
169,00 € / Stück    
Preis inkl. MwSt., zzgl. Versand

zum Online-Shop

STAGE-2 - bis 20 kg / Stück

STAGE-2 - bis 20 kg / Stück
Absorberfuß belastbar bis  20 kg pro Stück

  • Durchmesser 54 mm
  • Höhe: 33 oder 48 mm
  • Lieferumfang: 1 Absorberfuß
229,00 € / Stück   
Preis inkl. MwSt., zzgl. Versand

zum Online-Shop

We use cookies on our website. Some of them are essential for the operation of the site, while others help us to improve this site and the user experience (tracking cookies). You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.